List of all publications and forms available

Occupational Black Spot Report GB104

This report (the 'Black Spots report') is a compilation of three statistical reports and presents three different approaches to the identification of potential target areas for the strategic prevention of workplace injuries.

Size: 1.3 mb, 84 pages

Format: Report; Internet only

Occupational Black Spot Report - Update 03 GB104.1

An update of the 1999 black spots report 'Potential target areas for the strategic prevention of workplace injuries'. The 2003 Update examines the trends between 1997–98 and 2001–02, and identifies a set of 12 occupational black spot groups that can be targeted for future injury intervention activities.

Size: 399.5 kb, 72 pages

Format: Report; Internet only

Occupational Black Spot Report - Update 06 GB104.2

The Occupational Black Spots Injury Report: Update 2006 is the third installment of Black Spot reports. This report covers severe injuries sustained and lodged during 2002-03 to 2005-06.

Size: 573.1 kb, 56 pages

Format: Report; Internet only

Occupational Licensing (Approved Courses of Training for Electrical Work) Notification 2008

As required under sections 22 and 25 of the Occupational Licensing Act 2005, this notification sets out the approved courses of training for apprentices and trainees to perform electrical work, without the need to hold an electrical practitioner’s licence.

Size: 67.0 kb, 3 pages

Format: Legislation guide

Occupational Licensing (Cable Jointers and Lineworkers Order) 2008

Explains the exemption of cable jointers and lineworkers and when they must become licensed under the Occupational Licensing Act 2005

Size: 57.7 kb, 1 page

Format: Legislation guide

Occupational Licensing (Classification of Electrical Work and Defective Electrical Work) Determination 2008 DD002

This determination is for the purposes of classifying electrical work and defective electrical work under the Occupational Licensing (Electrical Work) Regulations 2008

Size: 67.3 kb, 3 pages

Format: Legislation guide

Occupational Licensing (Electrical Infrastructure and Installation Exemptions) Order 2008

This order sets out the exemption of electrical infrastructure and installation exemptions under the Occupational Licensing Act 2005

Size: 61.2 kb, 2 pages

Format: Legislation guide

Occupational Licensing (Electrical Infrastructure) Insurance Notice 2009

This Notice specifies the insurance required to be held by licence holders who undertake prescribed work on electrical infrastructure owned by electricity entities.

Size: 58.0 kb, 2 pages

Format: Legislation guide

Occupational Licensing (Electrical Work) Determination 2008 DD001

Objects of this Determination are for the purposes of issuing licences to practitioners for electrical work under the Occupational Licensing Act 2005. (a) electrical work is divided into classes as provided by this Determination; and (b) applicants for licences must show evidence of competence, and comply with other requirements, as provided by this Determination.

Size: 108.0 kb, 11 pages

Format: Legislation guide

Occupational Licensing (Electrical Work) Regulations 2007

Size: 134.4 kb, 49 pages

Format: Legislation guide

Occupational Licensing (Eligibility for Nominated Manager for Electrical Contractors restricted to Cable Jointing or Linework) Notification 2009

Eligibility requirements and approved courses for nominated managers for electrical contractors who carry out work restricted to cable jointing work or linework.

Size: 64.3 kb, 2 pages

Format: Legislation guide

Occupational Licensing (Fit and Proper) Code of Practice 2008 COP017

To be granted and retain a licence under the Occupational Licensing Act 2005, a contractor and practitioner must be fit and proper. Other persons under the Act, for example, company directors and officer bearers in companies, must also be fit and proper.

Size: 69.4 kb, 3 pages

Format: Code of practice; Internet only

Occupational Licensing (Nominated Manager - Approved Course of Training) Notification 2008

Purpose of this notice is to establish an approved course of training for nominated managers relevant to the management of the electrical contractor’s business under regulation 14(2)(b) of the Occupational Licensing (Electrical Work) Regulations 2008.

Size: 60.0 kb, 2 pages

Format: Legislation guide

Occupational Licensing (Standards of Electrical Work) Code of Practice 2008 COP015

This code sets the minimum standards for electrical work and duties in relation to the reporting of dangerous or defective electrical work.

Size: 66.2 kb, 2 pages

Format: Code of practice; Internet only

Occupational Licensing (Supervision of Prescribed Work) Code of Practice 2008 COP016

This code sets minimum standards for the supervision of those required to be supervised in the performance of prescribed work.

Size: 116.2 kb, 7 pages

Format: Code of practice; Internet only

Occupational Licensing (Time Limit to Apply for a Licence) Determination 2008 DD003

For the purposes of section 36(4) of the Occupational Licensing Act 2005, the time limit to apply for a licence, at the completion of an approved course of training, is one calendar month.

Size: 53.3 kb, 1 page

Format: Legislation guide

Occupational Licensing General Insurance Notice 2008

This Notice specifies the insurance required to be held by licence holders under the Occupational Licensing Act 2005.

Size: 117.4 kb, 13 pages

Format: Legislation guide

Occupational Licensing in Tasmania GB193

Information on the Occupational Licensing Act 2005 and how it affects electrical workers, plumbers and gasfitters.

Size: 108.5 kb, 2 pages

Format: Legislation guide

OHS access to workplaces - Information paper AR012

The Minister for Workplace Relations has announced the proposal to amend the Workplace Health and Safety Act 1995 (the WHS Act) to allow appropriately authorised representatives of employee organisations to enter workplaces to discuss health and safety issues or to enquire into and facilitate the resolution of a health and safety issue at the workplace, subject to specified conditions and protections.

Size: 144.4 kb, 14 pages

Format: Legislation guide

OLA info sheet Nov 08

Information for electrical workers, plumbers and gasfitters on the Occupational Licensing Act 2005 and how it will affect them.

Size: 99.8 kb, 8 pages

Format: Guidance booklet

OLA letter to stakeholders

Letter to electrical stakeholders regarding commencement of Occupational Licensing Act 2005

Size: 55.5 kb, 2 pages

Format: Guidance booklet

On-site disposal systems GB174

The purpose of this brochure is to advise owners or occupiers of land using on-site disposal systems involving conventional septic tanks and Aerated Wastewater Treatment Systems of how they work and how to maintain them.

Size: 248.5 kb, 2 pages

Format: Guidance booklet

Order form

Information on the new wiring rules AS/NZS 3000:2007, electrical installations and where it may be purchased.

Size: 379.0 kb, 2 pages

Format: Form

Organic Solvents IS037

Information sheet on solvents. A solvent can be defined as a substance that dissolves another substance to form a liquid.

Size: 111.0 kb, 4 pages

Format: Fact sheet; Internet only

Overview of Security of Payment Bill AR013.1

An overview of the Building and Construction Industry Security of Payment Bill 2009

Size: 222.6 kb, 6 pages

Format: Legislation guide

Overview of the Occupational Licensing Act 2005 for electrical stakeholders

An overview of the Occupational Licensing Act 2005 for electrical stakeholders

Size: 181.8 kb, 23 pages

Format: Legislation guide

Owner-builder Kit GB177

Helping owner-builders understand their duties and obligations when intending to carryout their own building work according to the legislation. Includes Owner Builder Statement (Form 34).

Size: 767.7 kb, 60 pages

Format: Kit

Owner-builders - Do you know your responsibliities? GB164

Information on responsibilities owner-builders have under legislation that allow them to build.

Size: 294.0 kb, 2 pages

Format: Guidance booklet